Fkm/fpm Control Valve - Pierburg (7.06117.37.0)
2006-2023 Pierburg (706117370)
Sale Price$134.79
Description : Electro-pneumatic valves from PIERBURG are used for the switching and control of intake manifolds, secondary air systems, exhaust gas flaps, and air conditioning units as well as for the implementation of comfort and safety functions.
With a market share of 65%, Pierburg is the European market leader in this segment.
A daily production rate of 45,000 pieces enables the production of 250 electric valves for series production. Electric valves from PIERBURG are used by almost all renowned manufacturers.
Technical information
- Electro-pneumatic valves: In the same way that switches and dimmers function in an electrical circuit, electro-pneumatic valves operate with a high level of accuracy and excellent dynamics in the pneumatic system of the vehicle. Together with a pneumatic actuator (»pressure box«), this is how flaps and valves are actuated, for example the EGR valve or the wastegate flap on the turbocharger. Almost all vehicles use vacuum as an auxiliary energy form (manifold vacuum or vacuum pump). New vehicles are often fitted with multiple electro-pneumatic valves.
- Hydraulic valves: Hydraulic valves have been specially developed for use in the fuel system, e.g. as an activated carbon filter regeneration valve, isolating valve, or cut-off valve for the direct gasoline injection.
- Recirculating air valves: During coasting, the recirculating air valve opens a bypass from the thrust side of the compressor to the intake side. Together with the boost pressure control valve, it enables the turbocharger behavior to adapt quickly to the driving situation. It therefore contributes to the driving dynamics, noise reduction, and the reduction of the turbo lag during load changes.
- Control valves for camshaft adjustment: Control valves guide the oil flow through various oil channels to the respective chambers in the hydraulic camshaft adjuster. The camshaft is then twisted relative to the camshaft gear and the valve timings are altered.
Diagnostic information
- Firstly, the electrical actuation of an electric valve should be checked by the engine control unit and, if necessary, any switching relays or fuses.
- Electro-pneumatic valves require auxiliary energy in the form of vacuum. If a control pressure of at least 390 mbar – which corresponds to an absolute pressure of 610 mbar – is not achieved, the entire vacuum system must be checked for leakages, e.g. using a vacuum hand pump, and the damaged part must be replaced. Insufficient vacuum can also be caused by a worn vacuum pump. Black smoke, erratic engine running, lack of power, or engine misfires may also be caused due to a lack of vacuum. A "turbo lag", i.e. insufficient performance when throttling after coasting, may indicate a recirculating air valve fault. For faults that are attributed to the control valves for the camshaft adjustment, the gear and timing chain of the camshaft adjustment should first be checked and the timing chain retensioned if necessary.
Technical information
- Electro-pneumatic valves: In the same way that switches and dimmers function in an electrical circuit, electro-pneumatic valves operate with a high level of accuracy and excellent dynamics in the pneumatic system of the vehicle. Together with a pneumatic actuator (»pressure box«), this is how flaps and valves are actuated, for example the EGR valve or the wastegate flap on the turbocharger. Almost all vehicles use vacuum as an auxiliary energy form (manifold vacuum or vacuum pump). New vehicles are often fitted with multiple electro-pneumatic valves.
- Hydraulic valves: Hydraulic valves have been specially developed for use in the fuel system, e.g. as an activated carbon filter regeneration valve, isolating valve, or cut-off valve for the direct gasoline injection.
- Recirculating air valves: During coasting, the recirculating air valve opens a bypass from the thrust side of the compressor to the intake side. Together with the boost pressure control valve, it enables the turbocharger behavior to adapt quickly to the driving situation. It therefore contributes to the driving dynamics, noise reduction, and the reduction of the turbo lag during load changes.
- Control valves for camshaft adjustment: Control valves guide the oil flow through various oil channels to the respective chambers in the hydraulic camshaft adjuster. The camshaft is then twisted relative to the camshaft gear and the valve timings are altered.
Diagnostic information
- Firstly, the electrical actuation of an electric valve should be checked by the engine control unit and, if necessary, any switching relays or fuses.
- Electro-pneumatic valves require auxiliary energy in the form of vacuum. If a control pressure of at least 390 mbar – which corresponds to an absolute pressure of 610 mbar – is not achieved, the entire vacuum system must be checked for leakages, e.g. using a vacuum hand pump, and the damaged part must be replaced. Insufficient vacuum can also be caused by a worn vacuum pump. Black smoke, erratic engine running, lack of power, or engine misfires may also be caused due to a lack of vacuum. A "turbo lag", i.e. insufficient performance when throttling after coasting, may indicate a recirculating air valve fault. For faults that are attributed to the control valves for the camshaft adjustment, the gear and timing chain of the camshaft adjustment should first be checked and the timing chain retensioned if necessary.
- Min. 12 Months
- Safe, Secure Checkout
Product Details
Description
Electro-pneumatic valves from PIERBURG are used for the switching and control of intake manifolds, secondary air systems, exhaust gas flaps, and air conditioning units as well as for the implementation of comfort and safety functions.
With a market share of 65%, Pierburg is the European market leader in this segment.
A daily production rate of 45,000 pieces enables the production of 250 electric valves for series production. Electric valves from PIERBURG are used by almost all renowned manufacturers.
Technical information
- Electro-pneumatic valves: In the same way that switches and dimmers function in an electrical circuit, electro-pneumatic valves operate with a high level of accuracy and excellent dynamics in the pneumatic system of the vehicle. Together with a pneumatic actuator (»pressure box«), this is how flaps and valves are actuated, for example the EGR valve or the wastegate flap on the turbocharger. Almost all vehicles use vacuum as an auxiliary energy form (manifold vacuum or vacuum pump). New vehicles are often fitted with multiple electro-pneumatic valves.
- Hydraulic valves: Hydraulic valves have been specially developed for use in the fuel system, e.g. as an activated carbon filter regeneration valve, isolating valve, or cut-off valve for the direct gasoline injection.
- Recirculating air valves: During coasting, the recirculating air valve opens a bypass from the thrust side of the compressor to the intake side. Together with the boost pressure control valve, it enables the turbocharger behavior to adapt quickly to the driving situation. It therefore contributes to the driving dynamics, noise reduction, and the reduction of the turbo lag during load changes.
- Control valves for camshaft adjustment: Control valves guide the oil flow through various oil channels to the respective chambers in the hydraulic camshaft adjuster. The camshaft is then twisted relative to the camshaft gear and the valve timings are altered.
Diagnostic information
- Firstly, the electrical actuation of an electric valve should be checked by the engine control unit and, if necessary, any switching relays or fuses.
- Electro-pneumatic valves require auxiliary energy in the form of vacuum. If a control pressure of at least 390 mbar – which corresponds to an absolute pressure of 610 mbar – is not achieved, the entire vacuum system must be checked for leakages, e.g. using a vacuum hand pump, and the damaged part must be replaced. Insufficient vacuum can also be caused by a worn vacuum pump. Black smoke, erratic engine running, lack of power, or engine misfires may also be caused due to a lack of vacuum. A "turbo lag", i.e. insufficient performance when throttling after coasting, may indicate a recirculating air valve fault. For faults that are attributed to the control valves for the camshaft adjustment, the gear and timing chain of the camshaft adjustment should first be checked and the timing chain retensioned if necessary.
Technical information
- Electro-pneumatic valves: In the same way that switches and dimmers function in an electrical circuit, electro-pneumatic valves operate with a high level of accuracy and excellent dynamics in the pneumatic system of the vehicle. Together with a pneumatic actuator (»pressure box«), this is how flaps and valves are actuated, for example the EGR valve or the wastegate flap on the turbocharger. Almost all vehicles use vacuum as an auxiliary energy form (manifold vacuum or vacuum pump). New vehicles are often fitted with multiple electro-pneumatic valves.
- Hydraulic valves: Hydraulic valves have been specially developed for use in the fuel system, e.g. as an activated carbon filter regeneration valve, isolating valve, or cut-off valve for the direct gasoline injection.
- Recirculating air valves: During coasting, the recirculating air valve opens a bypass from the thrust side of the compressor to the intake side. Together with the boost pressure control valve, it enables the turbocharger behavior to adapt quickly to the driving situation. It therefore contributes to the driving dynamics, noise reduction, and the reduction of the turbo lag during load changes.
- Control valves for camshaft adjustment: Control valves guide the oil flow through various oil channels to the respective chambers in the hydraulic camshaft adjuster. The camshaft is then twisted relative to the camshaft gear and the valve timings are altered.
Diagnostic information
- Firstly, the electrical actuation of an electric valve should be checked by the engine control unit and, if necessary, any switching relays or fuses.
- Electro-pneumatic valves require auxiliary energy in the form of vacuum. If a control pressure of at least 390 mbar – which corresponds to an absolute pressure of 610 mbar – is not achieved, the entire vacuum system must be checked for leakages, e.g. using a vacuum hand pump, and the damaged part must be replaced. Insufficient vacuum can also be caused by a worn vacuum pump. Black smoke, erratic engine running, lack of power, or engine misfires may also be caused due to a lack of vacuum. A "turbo lag", i.e. insufficient performance when throttling after coasting, may indicate a recirculating air valve fault. For faults that are attributed to the control valves for the camshaft adjustment, the gear and timing chain of the camshaft adjustment should first be checked and the timing chain retensioned if necessary.
Part Number (MPN)
7.06117.37.0
Brand
SKU
7.06117.37.0
UPC / GTIN
028977910135 / 04028977910135
Condition
New
Operating Mode
Electric
UPC
04028977910135
Valve Type
Control Valve
Voltage [v]
12
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
Vehicle #1
Year
Make
Model
Body & Trim
Engine & Transmission
| Brand | Equivalent Part Numbers |
|---|---|
BrandEquivalent Part Numbers
ATI
1802555776
AUTEX
716021
Airtex
2T1062
Audi
03H906455, 06F109257B
Autex Autoteile-Export
716021
Autopart International
1802555776
BWD
VV1093
Shipping Policy
- In stock orders ship within 24 hours (excluding weekends).
- Weekend orders will be processed the next business day.
- All pickup order must be verified with a photo ID before the parts are released.
- If a part is not in stock and must be ordered from the manufacturer, it usually takes 2-3 days to arrive to us and will be promptly shipped to you. Most of the orders are shipped complete within 2-3 business days. A few of the parts ordered from the manufacturer may take up to 5-12 business days to arrive and will ship to you immediately.
- Depending upon location, ground shipments usually take 2-7 days.
- Backorder parts from Germany usually take 15-20 days before it would ship to you.
- Audi Tradition, ABT, P3, and BG products will not be eligible for any shipping discounts.
- Your order may be shipped Overnight for an additional cost.
- Overnight orders will be shipped out when stock is available.
- Oversized shipments may incur an additional charge; you will be contacted prior to shipping for approval.
- We cannot guarantee transit times for ground and oversize orders.
- We are not responsible for any lost or stolen packages that are delivered.
- Shipping Carrier substitutions may be made at our determination in an attempt to reduce shipping cost to the customer.
- We do not ship internationally.
- In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.
- We do not ship COD orders.
Check out our Shipping Policy for more details.
Return Policy
- Contact us to arrange for any returns.
- We do not supply return labels for wrong parts ordered by the consumer unless it is a catalog error or a lookup error by one of our associates.
- A copy of the invoice will need to be included with the return.
- There is a 15% restocking fee charged against all returned parts.
- Parts must be resaleable and in the original packaging.
- We cannot take back used, installed, or tried parts.
- We cannot take back tools.
- Electrical parts are not returnable.
- We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria.
- Return request need to be within 30 days of receipt.
Cancellation Policy
- An order or a portion of an order may be cancelled up until the time it is shipped and no longer in our possession.
- If the cancelled part was special ordered from the manufacturer a return fee of 15% may apply.
Check out our Return Policy for more details.
EuroParts4Less
EuroParts4Less is your one stop source for all of your factory direct OEM Pierburg parts and accessories. Get your FKM/FPM CONTROL VALVE (706117370) delivered right to your home in just a matter of days. We guarantee fitment for your 2006-2023 Audi vehicle and will accept returns or exchanges to get your the right part. Be sure to verify your VIN at checkout to ensure your FKM/FPM CONTROL VALVE does in fact fit your vehicle. Once you've found the right parts, use our secure checkout page to buy the parts and select the best shipping option for your time frame.

