APR Roll-Control Lowering Springs - VW MK7/MK7.5 Jetta GLI (2019-2026) - APR (SUS00021)
(sus00021)
The Jetta GLI shares its performance DNA with the GTI, but it leaves the factory sitting tall with a wide wheel gap. APR Roll-Control Lowering Springs give the GLI the stance and handling it should have had from day one, without giving up the comfort that makes it a great daily driver.
This is the most aggressive drop in APR's MQB spring lineup: 33 mm (1.3 in) up front and 38 mm (1.5 in) out back, paired with 50% more front spring rate and 59% more rear spring rate than stock. We track and street tested multiple iterations to make sure the lower ride height comes with real gains in body control and steering response, not a harsh ride that bottoms out on every expansion joint.
Each spring is designed in house and made in the USA from high-tensile chrome silicon steel, finished in APR's signature red powder coat. They bolt in place of the factory springs, work with both DCC and non-DCC dampers, and fit every 2019-2026 Jetta GLI, including the 2025+ refresh. Add APR Lowering Bumpstops (SUS00025) for the complete package.
Measured on US 2020 MK7 Jetta GLI (DCC), Front:
382 mm (OEM) vs 349 mm (APR), a 33 mm reduction in CF height
215 lbs/in (OEM) vs 323 lbs/in (APR), a 50% increase in spring rate
Measured on US 2020 MK7 Jetta GLI (DCC), Rear:
375 mm (OEM) vs 337 mm (APR), a 38 mm reduction in CF height
227 lbs/in (OEM) vs 362 lbs/in (APR), a 59% increase in spring rate
Features:
- Lowers the Jetta GLI 33 mm (1.3 in) front and 38 mm (1.5 in) rear, the most aggressive drop in the APR MQB spring lineup, eliminating the factory 4x4 gap
- Increases spring rate 50% front (323 lbs/in) and 59% rear (362 lbs/in) to reduce body roll and sharpen steering response
- Dual-rate front (148 to 323 lbs/in) and rear (218 to 362 lbs/in) springs operate as single-rate linear springs under normal driving loads
- Track and street tested through multiple iterations so the bigger drop does not come with a harsh, crashy ride
- Correct ride height pairing keeps the dampers working in their range so the car does not bottom out
- Direct plug-and-play replacement for the factory springs, works with DCC and non-DCC OEM dampers
- Fits 2019-2026 VW Jetta GLI, including the 2025+ refresh
- High-tensile chrome silicon steel resists sagging and fatigue for long-term ride height consistency
- Signature APR red powder coat protects against corrosion and road salt
- Designed in house and made in the USA
- Pair with APR Lowering Bumpstops (SUS00025) for maximum handling, performance and comfort
Note from APR: Measured on a US-spec 2020 MK7 Jetta GLI (DCC). OEM vs APR center-of-wheel-to-fender (CF): Front 382 mm vs 349 mm (-33 mm). Rear 375 mm vs 337 mm (-38 mm). Spring rate: Front 215 vs 323 lbs/in (+50%). Rear 227 vs 362 lbs/in (+59%).
Vehicle compatibility (per APR): Fits 2019-2026 Volkswagen Jetta GLI (GLI only)
- Color: Red
- Lowering maximum: 33mm (Front) (2020 MK7 GLI DCC), 38mm (Rear) (2020 MK7 GLI DCC)) IN
- part type: Coil Spring Lowering Kit
- Spring Material: Premium high tensile chrome silicon steel
- Spring Rate: 323 lbs/in (Front) / 362 lbs/in (Rear)
- Spring Type: Dual Rate (unloaded) / Linear (loaded)
- Version: MK7 Jetta GLI
- Brand: APR
- Emissions: Does not affect emissions (not covered by emissions regulations)
- UPC: 810009934950
- Min. 12 Months
- Safe, Secure Checkout
Product Details
Description
The Jetta GLI shares its performance DNA with the GTI, but it leaves the factory sitting tall with a wide wheel gap. APR Roll-Control Lowering Springs give the GLI the stance and handling it should have had from day one, without giving up the comfort that makes it a great daily driver.
This is the most aggressive drop in APR's MQB spring lineup: 33 mm (1.3 in) up front and 38 mm (1.5 in) out back, paired with 50% more front spring rate and 59% more rear spring rate than stock. We track and street tested multiple iterations to make sure the lower ride height comes with real gains in body control and steering response, not a harsh ride that bottoms out on every expansion joint.
Each spring is designed in house and made in the USA from high-tensile chrome silicon steel, finished in APR's signature red powder coat. They bolt in place of the factory springs, work with both DCC and non-DCC dampers, and fit every 2019-2026 Jetta GLI, including the 2025+ refresh. Add APR Lowering Bumpstops (SUS00025) for the complete package.
Measured on US 2020 MK7 Jetta GLI (DCC), Front:
382 mm (OEM) vs 349 mm (APR), a 33 mm reduction in CF height
215 lbs/in (OEM) vs 323 lbs/in (APR), a 50% increase in spring rate
Measured on US 2020 MK7 Jetta GLI (DCC), Rear:
375 mm (OEM) vs 337 mm (APR), a 38 mm reduction in CF height
227 lbs/in (OEM) vs 362 lbs/in (APR), a 59% increase in spring rate
Features:
- Lowers the Jetta GLI 33 mm (1.3 in) front and 38 mm (1.5 in) rear, the most aggressive drop in the APR MQB spring lineup, eliminating the factory 4x4 gap
- Increases spring rate 50% front (323 lbs/in) and 59% rear (362 lbs/in) to reduce body roll and sharpen steering response
- Dual-rate front (148 to 323 lbs/in) and rear (218 to 362 lbs/in) springs operate as single-rate linear springs under normal driving loads
- Track and street tested through multiple iterations so the bigger drop does not come with a harsh, crashy ride
- Correct ride height pairing keeps the dampers working in their range so the car does not bottom out
- Direct plug-and-play replacement for the factory springs, works with DCC and non-DCC OEM dampers
- Fits 2019-2026 VW Jetta GLI, including the 2025+ refresh
- High-tensile chrome silicon steel resists sagging and fatigue for long-term ride height consistency
- Signature APR red powder coat protects against corrosion and road salt
- Designed in house and made in the USA
- Pair with APR Lowering Bumpstops (SUS00025) for maximum handling, performance and comfort
Note from APR: Measured on a US-spec 2020 MK7 Jetta GLI (DCC). OEM vs APR center-of-wheel-to-fender (CF): Front 382 mm vs 349 mm (-33 mm). Rear 375 mm vs 337 mm (-38 mm). Spring rate: Front 215 vs 323 lbs/in (+50%). Rear 227 vs 362 lbs/in (+59%).
Vehicle compatibility (per APR): Fits 2019-2026 Volkswagen Jetta GLI (GLI only)
- Color: Red
- Lowering maximum: 33mm (Front) (2020 MK7 GLI DCC), 38mm (Rear) (2020 MK7 GLI DCC)) IN
- part type: Coil Spring Lowering Kit
- Spring Material: Premium high tensile chrome silicon steel
- Spring Rate: 323 lbs/in (Front) / 362 lbs/in (Rear)
- Spring Type: Dual Rate (unloaded) / Linear (loaded)
- Version: MK7 Jetta GLI
- Brand: APR
- Emissions: Does not affect emissions (not covered by emissions regulations)
- UPC: 810009934950
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
Shipping Policy
- In stock orders ship within 24 hours (excluding weekends).
- Weekend orders will be processed the next business day.
- All pickup order must be verified with a photo ID before the parts are released.
- If a part is not in stock and must be ordered from the manufacturer, it usually takes 2-3 days to arrive to us and will be promptly shipped to you. Most of the orders are shipped complete within 2-3 business days. A few of the parts ordered from the manufacturer may take up to 5-12 business days to arrive and will ship to you immediately.
- Depending upon location, ground shipments usually take 2-7 days.
- Backorder parts from Germany usually take 15-20 days before it would ship to you.
- Audi Tradition, ABT, P3, and BG products will not be eligible for any shipping discounts.
- Your order may be shipped Overnight for an additional cost.
- Overnight orders will be shipped out when stock is available.
- Oversized shipments may incur an additional charge; you will be contacted prior to shipping for approval.
- We cannot guarantee transit times for ground and oversize orders.
- We are not responsible for any lost or stolen packages that are delivered.
- Shipping Carrier substitutions may be made at our determination in an attempt to reduce shipping cost to the customer.
- We do not ship internationally.
- In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.
- We do not ship COD orders.
Return Policy
- Contact us to arrange for any returns.
- We do not supply return labels for wrong parts ordered by the consumer unless it is a catalog error or a lookup error by one of our associates.
- A copy of the invoice will need to be included with the return.
- There is a 15% restocking fee charged against all returned parts.
- Parts must be resaleable and in the original packaging.
- We cannot take back used, installed, or tried parts.
- We cannot take back tools.
- Electrical parts are not returnable.
- We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria.
- Return request need to be within 30 days of receipt.
Cancellation Policy
- An order or a portion of an order may be cancelled up until the time it is shipped and no longer in our possession.
- If the cancelled part was special ordered from the manufacturer a return fee of 15% may apply.
APR
Founded in 1997, APR is the global leader in performance aftermarket parts for Volkswagen, Audi, Seat, and Porsche. APR offers everything from car performance parts to exhaust systems, engine components, suspension components, intake systems, brakes, and more. This means that no matter what type of product or service you are looking for related to automotive performance, APR can provide it for you. All products are priced competitively so that everyone can benefit without breaking the bank.
Shop APR Products Online Today
When it comes to automotive performance parts and services, few brands can match what APR has to offer. From top-notch customer service to competitive prices on high-quality parts - they have it all! Please don't hesitate to contact us with any additional questions regarding these parts.
EuroParts4Less is your one stop source for all of your factory direct OEM APR parts and accessories. Get your APR Roll-Control Lowering Springs - VW MK7/MK7.5 Jetta GLI (2019-2026) (sus00021) delivered right to your home in just a matter of days. We guarantee fitment for your vehicle and will accept returns or exchanges to get your the right part. Be sure to verify your VIN at checkout to ensure your APR Roll-Control Lowering Springs - VW MK7/MK7.5 Jetta GLI (2019-2026) does in fact fit your vehicle. Once you've found the right parts, use our secure checkout page to buy the parts and select the best shipping option for your time frame.