vehicles with DRC, DRC will be deactivated
height adjustable at front and rear axle, stainless steel technology
pressure and rebound adjustable
FA-load: up to 1180 kg, RA-load: up to 1085 kg
Lowering: FA: aprox. 10-35mm RA: aprox. 10-35mm
suitable for vehicles under the following axle load limit:
FA: up to max: 1180kg
RA: up to max: 1085kg

also suitable for:
- vehicles with DRC (see under additional informations)

Lowering:
FA: ca. 10-35 mm
RA: ca. 10-35 mm

additional informations:
The final lowering depends on the individual configuration of the vehicle. An additional adaptation on the desired height measure is possible by the individual set possibility of the ABT sport suspension.
After mounting the ABT - suspension springs the position of the head lamps and axle needs to be checked and possibly re-adjusted (work incl. in the assembly costs).
Addtionally and depending on the serial car configuration further technical systems (for example: Audi lane assist; adaptive cruise control; rear assist; parking system plus, etc.) needs to be checked and possibly re-adjusted.
In this regards it is necessary to follow the current instructions of the manufacturer. The cost for possibly additional work is not included in the assembly time and therefore needs to be charged additionally.
Vehicles with DRC also need a separate shutdown set. The article is KW68510476 and must be ordered separately. Without this shutdown set it will come to error massages.

vehicles with DRC, DRC will be deactivated
height adjustable at front and rear axle, stainless steel technology
pressure and rebound adjustable
FA-load: up to 1180 kg, RA-load: up to 1085 kg
Lowering: FA: aprox. 10-35mm RA: aprox. 10-35mm
suitable for vehicles under the following axle load limit:
FA: up to max: 1180kg
RA: up to max: 1085kg

also suitable for:
- vehicles with DRC (see under additional informations)

Lowering:
FA: ca. 10-35 mm
RA: ca. 10-35 mm

additional informations:
The final lowering depends on the individual configuration of the vehicle. An additional adaptation on the desired height measure is possible by the individual set possibility of the ABT sport suspension.
After mounting the ABT - suspension springs the position of the head lamps and axle needs to be checked and possibly re-adjusted (work incl. in the assembly costs).
Addtionally and depending on the serial car configuration further technical systems (for example: Audi lane assist; adaptive cruise control; rear assist; parking system plus, etc.) needs to be checked and possibly re-adjusted.
In this regards it is necessary to follow the current instructions of the manufacturer. The cost for possibly additional work is not included in the assembly time and therefore needs to be charged additionally.
Vehicles with DRC also need a separate shutdown set. The article is KW68510476 and must be ordered separately. Without this shutdown set it will come to error massages.